Column Linear Pendant

The Column Linear Pendant is turned from a 2-inch solid brass bar stock blank, not drawn tube or pipe. The blank is cut to length, held in a lathe chuck, and turned down to the linear column profile. Each piece is hand-finished, then wired and assembled in our Floyd, Virginia workshop.

A fixture turned from solid stock is dense at the center and holds its profile. That matters on a 14-inch bar hung over an island or a long counter, where the line of the profile is the whole design. Two lights sit at either end of the bar, aimed at the surface below.

The photo shows one finish. The Column Linear is offered in Polished Brass, Satin Brass, Aged Brass Patina, Antique Bronze Patina, and Oil-Rubbed Bronze Patina; hand-finishing is done on every piece.

Specifications

• Dimensions: 14" W x 2" H
• Canopy: Ø5"
• Construction: Solid brass, turned from 2-inch bar stock
• Sockets: (2) 60W MAX candelabra-base; lamps not included
• 1 circuit, 120V
• Rating: NRTL dry location

Manufacturing Process

Each Column Linear Pendant is cut from a 2-inch solid brass bar stock blank and turned to profile on a lathe in our Floyd, Virginia facility. The finished bar is hand-polished or satined by hand, patinated where the finish calls for it, and sealed with clear lacquer. The fixture is then electrically assembled and tested before it ships.

Installation Notes

Professional installation is recommended because of the weight. Mounting hardware and detailed instructions are included.

Hand-fabricated in Floyd, Virginia with global materials